0
flame14j

Sony Pc1 Error C:31:30

Recommended Posts

I had the same thing going on with a trv 525 today,
try taking the battery off and see if it resets, it worked for me and now the camera works fine.

FWY- when I did it I had the camera powered up in vtr (play back mode) and then pulled the battery off.
waited ten seconds and set the camera to off and then put the battery back on, turned it on and it was reset, working fine now.B|
I just tried it after following the link posted to another link and reading a post there.:)
~
you can't pay for kids schoolin' with love of skydiving! ~ Airtwardo

Share this post


Link to post
Share on other sites
On page 91 in my PC1 Manual it says to just reset the camera to clear this error code. 1) Remove the tape and re-insert it into the camera and try it. 2) Reset camera by removing battery and AC power and then turn on for 10 seconds or so, turn back off and re-install the battery or AC power.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0