Brains 2 #1 January 13, 2006 Ok, so i followed Craig's directions on how to wire up the remote, but i used a new belgium sunshine wheat Now what does everyone else do with the remote port cover? (On the camera) It is large and i am afraid it will blow open and eventually tear off. Should i just put some gaffers tape over it to hold it in place while switch is plugged in?? Never look down on someone, unless they are going down on you. Quote Share this post Link to post Share on other sites
Miami 0 #2 January 13, 2006 QuoteShould i just put some gaffers tape over it to hold it in place while switch is plugged in?? Yes. Hope this helps...Miami Quote Share this post Link to post Share on other sites
diablopilot 2 #3 January 13, 2006 No. You should just put some gaffers tape over it to hold it in place while the switch is plugged in. ---------------------------------------------- You're not as good as you think you are. Seriously. Quote Share this post Link to post Share on other sites
Brains 2 #4 January 14, 2006 You guys are brilliant!! Thank you so much. Never look down on someone, unless they are going down on you. Quote Share this post Link to post Share on other sites
