0
thechutist

BOC Configuration For Deployment By Either MSI or RSI on Harness Hold Jumps

Recommended Posts

Quote

I'm posting this on behalf of a rigger who has been asked to install such a modification on a set of Vectors.

Can anyone recommend a source of design / installation information for such a configuration?


Regards,
Herb Thompson



I believe Kirk Smith (master rigger) was the first to do this, for Skydive Chicago's AFP program, on Javelin containers. Originally they had to do it under waiver until the BSRs were changed.
...

The only sure way to survive a canopy collision is not to have one.

Share this post


Link to post
Share on other sites
Double-sided BOC retrofit kits are available for Rigging Innovations. They are almost as easy to sew on as regular BOCs.
I few years back I retrofitted all 14 of the Perris Skydiving School's 14 student Telesis rigs over the course of one week (Monday to Friday).

Share this post


Link to post
Share on other sites
We designed and built our own (like most on the market) and have been using them for some two years.

It's a pretty easy design to build, although I don't know if it'd be cheaper to build them or but them.


"...and once you had tasted flight, you will walk the earth with your eyes turned skyward.
For there you have been, and there you long to return..."

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0