kidsmurf2000 0 #1 September 25, 2001 Hi,I'm trying to unhook my reserve from my container to send the container off to the manufacturer for some mods... I thought I could do this myself (my riggers a 2 hour round trip!), but the metal attachment rings between the container and the reserve lines are stuck firm. Is there a trick to opening them up? Any special tools needed? I don't want to force it un-necessarily, but does it just require brute strength?Thanks! Quote Share this post Link to post Share on other sites
PhreeZone 15 #2 September 25, 2001 A plyer and a screw driver are all that are needed. Use the Screw Driver to gan a leverage advantace on the Links. It should require a bit of brute strength but not too much.Just remember..... only a senior rigger and mount a reserve to a container.Be safe, be smooth, be fast..... and most importantly.... be phree Quote Share this post Link to post Share on other sites kidsmurf2000 0 #3 September 25, 2001 Thanks- I got them open with some brute strength; I'll be sure to get my rigger to reconnect everything once the mods are doneBlue ones! Quote Share this post Link to post Share on other sites riggerrob 558 #4 September 26, 2001 You only need an open end wrench.Use the floor to prevent the link from turning.Eliminating the screwdriver eliminates a lot of gouged fingers. Quote Share this post Link to post Share on other sites Join the conversation You can post now and register later. If you have an account, sign in now to post with your account. Note: Your post will require moderator approval before it will be visible. Reply to this topic... × Pasted as rich text. Paste as plain text instead Only 75 emoji are allowed. × Your link has been automatically embedded. Display as a link instead × Your previous content has been restored. Clear editor × You cannot paste images directly. Upload or insert images from URL. Insert image from URL × Desktop Tablet Phone Submit Reply 0
kidsmurf2000 0 #3 September 25, 2001 Thanks- I got them open with some brute strength; I'll be sure to get my rigger to reconnect everything once the mods are doneBlue ones! Quote Share this post Link to post Share on other sites
riggerrob 558 #4 September 26, 2001 You only need an open end wrench.Use the floor to prevent the link from turning.Eliminating the screwdriver eliminates a lot of gouged fingers. Quote Share this post Link to post Share on other sites
