0
Pinky2

Naming the landing pattern

Recommended Posts

More exactly it is just like the terms used in aviation when an airplane does a circuit which is a rectangle. It is the upwind leg (at take off), crosswind leg, downwind leg, base leg (which is a crosswind leg before final approach, and the final leg. Sometimes we call for a short final leg too.;)

Learn from others mistakes, you will never live long enough to make them all.

Share this post


Link to post
Share on other sites
Pinky2

Cheers mrrubin for the answer,

Am I right if I "attach" an altitude of 400m (1300feet) to the beginning of the downwind phase, 200m base and 100m final?

;)



Those altitudes sound fine. There is no "perfect" answer. Your last turn should be high enough for your canopy to fly for at least ten seconds after the turn and before your flare.

Other than that, try to fly your pattern as consistently as possible, hitting your altitude check-points accurately and, of course, keeping your eyes open for other canopies.

Have a plan for your canopy flight, fly it the best you can, then after the jump evaluate how it worked out and adjust it for the next jump as you need to allow for accuracy, wind conditions etc..

This is one of the things you will need to re-learn if you change canopies.
"The ground does not care who you are. It will always be tougher than the human behind the controls."

~ CanuckInUSA

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0