Phantom helmet Vmag mount

Recommended Posts

I'm dropping this here in case people would like to fabricate them.
Compatible with the Vmag system except for the magnets hole
The mount use the existing holes in the helmet
3D printing process = HP PA 12 (MJF)

1x Socket head cap screw M5-0.8 x 20mm
1x Nut M5x0.8
2x Button head #6-32 x 1/2in
2x Nut #6-32
4x Countersunk screw M3-0.5 x 8mm
4x Nut M3-0.5

Ebay N52 magnet 20x10x4mm with 4mm hole
You need the poles to be inverted for them to work.
I had to invert 1 side and drill a countersunk using a diamond bit



Phantom.stl Vmag camera short.stl

Edited by tabouare
  • Like 1

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.