1 1
teri drao

Airborne Systems

Recommended Posts

Amusing how it attaches suspension lines to mini-flares. Note that these mini-flares are far broader than those used by Flight Concepts. They are conceptually more like the broad flares on Para-Foils and other early ram-air canopies.

Share this post


Link to post
Share on other sites
On 5/2/2021 at 11:39 AM, riggerrob said:

Amusing how it attaches suspension lines to mini-flares. Note that these mini-flares are far broader than those used by Flight Concepts. They are conceptually more like the broad flares on Para-Foils and other early ram-air canopies.

What are flares in this context?

Share this post


Link to post
Share on other sites
23 minutes ago, nwt said:

What are flares in this context?

They are the method of attaching the lines to the canopy using triangular pieces of fabric sewn into the bottom seam. They are used to distribute the load and in some designs also act as small keels and can replace stabilizers. As shown in this drawing of an FCI reserve canopy in side view.

 

Screenshot_2021-05-03 change Nov 2006 PDF - reserve2006 pdf.png

  • Like 2

Share this post


Link to post
Share on other sites
On 5/2/2021 at 6:12 AM, gowlerk said:

No, but I love the marketing term for front risering. "Glide Path Modulation".

They are talking about a B-line stall here, which is a bit different.  It's common on paragliders, not so common on parachutes.

Share this post


Link to post
Share on other sites
(edited)
11 minutes ago, billvon said:

They are talking about a B-line stall here, which is a bit different.  It's common on paragliders, not so common on parachutes.

So that would be non-cascaded A-B lines with a method of shortening the Bs in flight?

Edit, never mind, found it. The paragliding Wiki page has a lot of info....

 

B-line stall
In a B-line stall, the second set of risers from the leading-edge/front (the B-lines) are pulled down independently of the other risers, with the specific lines used to initiate a stall. This puts a spanwise crease in the wing, thereby separating the airflow from the upper surface of the wing. It dramatically reduces the lift produced by the canopy and thus induces a higher rate of descent. This can be a strenuous manoeuvre, because these B-lines have to be held in this position, and the tension of the wing puts an upwards force on these lines. The release of these lines has to be handled carefully not to provoke a too fast forward shooting of the wing, which the pilot then could fall into. This is less popular now as it induces high loads on the internal structure of the wing.
Edited by gowlerk

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

1 1