Using a Garmin Fenix 6x as a secondary altimeter

Recommended Posts

I am using a Fenix for several years now (fenix1 and 5), but I still have an audible altimeter. I know some feel very bad about not having a real mechanical alti, but it works for me...  

The only issue is to avoid any automatic firmware update. When an update is available, I installed it and then validate with 3 jumps.

You need also to set the watch correctly. barometer should be set on "altimeter" mode; the Auto calibration set to Off, and only manual calibration before the first jump.

By the way, I developed an skydiving application for the Fenix... and it's free.


Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.