SkyHopperZH 0 #1 Posted March 4, 2019 Hey guys. I sometimes see things like that and think this could jam the three ring system. When i tell people they don't seem to take it seriously. In a shitty case i could see the material preventing the medium ring from going through the big ring and jamming it there. Am i paranoid? ;) (Nothing is misrouted, the material is just behind the ring instead of the side) Blue skies. Quote Share this post Link to post Share on other sites
gowlerk 1,903 #2 March 4, 2019 I agree with you. And I frequently point it out to people. I have not actually heard of it causing a hang up, but I'm sure it could. Quote Share this post Link to post Share on other sites
Quagmirian 40 #3 March 4, 2019 The other issue is the RSL release not being accessible when you want it (water landings etc). Quote Share this post Link to post Share on other sites
gowlerk 1,903 #4 March 4, 2019 (edited) 28 minutes ago, Quagmirian said: The other issue is the RSL release not being accessible when you want it (water landings etc). Oh, I don't know about that. It's not very accessible in the picture. But with the risers stretched out from the canopy being in flying configuration it would be the same as normal. And the same thing would make it hard to actually cause a hang up. But just a little more material through that large ring and it could be trouble. Edited March 4, 2019 by gowlerk Quote Share this post Link to post Share on other sites
gb1 2 #5 March 5, 2019 Mostly newer jumpers can be very stupid. They think that just because it is an "approved" rig and reserve is in date, nothing can be screwed up. They say "it's all good". As long as they look cool and are patted on the back by others is their focus. Remember, It doesn't take much to work and it doesn't take much to not work. Good Catch! Quote Share this post Link to post Share on other sites
SkyHopperZH 0 #6 March 11, 2019 Thanks for posting your opinions! Happy jumping. Quote Share this post Link to post Share on other sites
