0
Twoply

Need help identifying parts of a pulley

Recommended Posts

I'm going to guess Bushing for the axle. The 2 female screw inserts look like that is fastened to something else. The axle appears to be inserted into that. OR the inserts are for set screws to fix the pulley (channel wheel?) axle to the large hub in which case the hub would be an enlarged extension of the axle.

This probably makes no sense whatsoever but it's not the first time I've done this.
Most of the things worth doing in the world had been declared impossilbe before they were done.
Louis D Brandeis

Where are we going and why are we in this basket?

Share this post


Link to post
Share on other sites
It is not a bushing, as a bushing is internal and is a bearing surface. A bushing is typically installed to reduce the diameter of the hole a shaft goes into. It is not an axle, as an axle is the shaft that a wheel or pully turns around. It is not a shaft. It is a device that slips over a shaft.

I think that part of the drawing is best described as a sleeve with threaded set screw holes. (As a sleeve "slips over somethng".)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0