nicsoew 0 #1 April 11, 2018 Hi guys, some of you remember I posted video of my cutaway some 6 months ago. Today we know what happened and I want to share it with you because I want others to be aware of such small issue that can cause cutaway. Combination of Vortex 2 toggles and new risers created problem. Toggles had loose fit into new toggle keepers so while main was deploying toggle unstowed and caused line twist and cutaway. I noticed that toggles are fitting loosely so I added some paper inside toggle keepers, tested it and it never happened again. I asked my rigger to solve the problem. Thats it, I just wanted to share this with all of you in case someone came upon similar issue. https://youtu.be/8KsNRu6XEUo Quote Share this post Link to post Share on other sites
Westerly 61 #2 April 13, 2018 Well just about every rig user manual says do not use any aftermarket parts with your rig; only use OEM replacements sourced from the manufacturer. I guess this is one of the reasons why? Quote Share this post Link to post Share on other sites
nicsoew 0 #3 April 13, 2018 Yes, you are right. Never make mistake as I did. Quote Share this post Link to post Share on other sites
