GideonY 0 #1 May 27, 2017 The sizing table in Mirage web-site says that container M8 compatible only for Sabre 2 230. But according to my understanding there should be some flexibility, so I’m wondering if 210 main still can reasonable fit into M8 container. Quote Share this post Link to post Share on other sites
riggerrob 558 #2 May 27, 2017 Installing a canopy one size (15 square feet) larger or smaller usually fits fine. The next smaller size will be slightly easier to pack. You might need to shorten your closing loop to maintain sufficient tension on your pin. OTOH The next larger size of canopy will be more work to pack and will probably need a longer closing loop. Hint: if you can pick up the entire rig - with the bridle - your closing loop is too short! Hah! Hah! If you get silly by trying to install a canopy two (30 square feet) or three (45 square feet) too big you are asking for troubled: slow pack jobs, sore hands, cursing packers, grommets pulling loose, cracked stiffeners, etc. Quote Share this post Link to post Share on other sites
cvlewis 0 #3 July 23, 2017 https://www.miragesys.com/sizing-guide/#top Quote Share this post Link to post Share on other sites
