Garrythegoat 0 #1 February 6, 2017 Hello, does any one jump an Avalon container? or know of any reviews? Thank you Garry. http://www.avalonskydive.com/site/avalon-sport Quote Share this post Link to post Share on other sites
Deyan 31 #2 February 7, 2017 They don't have an FAA TSO, so if you are US resident, you can't jump it. I'm not gonna comment about the gear itself."My belief is that once the doctor whacks you on the butt, all guarantees are off" Jerry Baumchen Quote Share this post Link to post Share on other sites
riggerrob 558 #3 February 8, 2017 I just repacked an Avalon Accuracy rig. Materials are as good or slightly better than American-made rigs. Quality of stitching is almost as good. The only wrinkles are on binding tape of difficult curves on the leg pads. Design quality is high, but APS Bulgaria did not slavishly copy an American-made rig. For example, the reserve bottom flap is unique. APS did all the drop-tests required for an FAA TSO but concluded that FAA paperwork was prohibitively expensive. The manual is well-illustrated and easy to read in English. Overall, Avalon quality matches American-made rigs, but the purchase price is significantly less. Quote Share this post Link to post Share on other sites
Garrythegoat 0 #4 February 9, 2017 ah k thanks for the reply yeah the price differnce is crazy. I will be jumping in the usa at some point so went for an Icon. Quote Share this post Link to post Share on other sites
JerryBaumchen 1,048 #5 February 9, 2017 Hi Rob, QuoteMaterials are as good or slightly better than American-made rigs. Are they using different materials than US-made rigs? Jerry Baumchen Quote Share this post Link to post Share on other sites
riggerrob 558 #6 February 9, 2017 JerryBaumchenHi Rob, QuoteMaterials are as good or slightly better than American-made rigs. Are they using different materials than US-made rigs? Jerry Baumchen -------------------------------------------------------------------- For the most part, Avalon materials are the same MIL SPEC/PIA SPEC materials as American-made rigs. APS Bulgaria use top-grade 1000 denier Cordura. A few tapes are herringbone/chevron weave, tougher than the ribbon weave tapes used on American-made rigs. Quote Share this post Link to post Share on other sites