Mirage semi-stowless bag question

[Diezel 0]

I switched from regular to semi-stowless bag on my Mirage G4.1 a while ago and immediately noticed that the bulk distribution changed now that most of the lines are against the back of the container as opposed to the bottom of the container in the original configuration. I have a freefly tab and noticed there's a lot less tension on it now that the bottom of the container is sort of hollow and soft. It wasn't a problem until the last jump when I discovered my pc 1/4 of the way out of the pouch and flapping in the wind on pull time. I know the day was hot and humid and canopy packed really small and I should have probably tighten closing loop a bit, but still. I think the new line arrangement changes bulk distribution radically enough to present a problem in certain circumstances. I'm wondering what's everyone's opinion on this and how to deal with it.

[riggerrob 558]

What is a "free fly tab?"

[Diezel 0]

it's 'freefly PAD'. my bad. it comes with tab that's tucked under right flap.

[hajnalka 0]

Hey Diezel,

Many of my people have switched to semi stowless bags, mostly Mirage and Vector. I haven't seen any difference in bulk distribution that alarms me.

Quote

I know the day was hot and humid and canopy packed really small and I should have probably tighten closing loop a bit, but still.

This time of year here in NC, I'm constantly shortening closing loops. I think most people underestimate the drastic effect that climate conditions can have on pack volume and loop length.

Take care & stay safe.