Neoslim22 0 #1 December 13, 2014 Is there any way to see what altitude and speed the unit fired at without sending it in? Thanks for any help. Quote Share this post Link to post Share on other sites
chuckakers 369 #2 December 13, 2014 Neoslim22Is there any way to see what altitude and speed the unit fired at without sending it in? Not that I know of. My best guess is fast enough to fire and low enough to get an ass chewin'.Chuck Akers D-10855 Houston, TX Quote Share this post Link to post Share on other sites
Neoslim22 0 #3 December 13, 2014 It was some our renal gear and the person said they cutaway at 2k and sat in at 1700, I was just trying to confirm this. Quote Share this post Link to post Share on other sites
aulanov 0 #4 December 13, 2014 http://www.vigil.aero/ir-download-box Quote Share this post Link to post Share on other sites
gowlerk 1,903 #5 December 13, 2014 I think you'll need to send it to DeLand to get the info. Then you'll likely have to decide who to believe. Is there any chance it was set to tandem mode instead of student mode? If there is any chance at all that it did fire on a 2000' ft cutaway it needs to go back in any case.Always remember the brave children who died defending your right to bear arms. Freedom is not free. Quote Share this post Link to post Share on other sites
Skydivesg 6 #6 December 14, 2014 Some dealers and bigger DZs have an IR reader. I have one just for these situations. Once you have the data downloaded to a computer you can read it. Once you have it downloaded you can also email the data to Vigil and they will read and confirm the data.Be the canopy pilot you want that other guy to be. Quote Share this post Link to post Share on other sites
