0
Kui

Wings brake stow

Recommended Posts

I purchased a new wings and the brake line stow on the back of the rear risers are extremely tight. Ive thought about jamming a thin rod in there to stretch it out while it sits on the days i dont jump
Quote

, but figured i should ask if there are other ways before i do a brute force method.

I fly a Pulse 170, so i have to use both the top and bottom brake stow. At the rate i have to work to get the brake line into the little tabs, ill need a reline at the stow location within 100 jumps!

Any tips and tricks to this? The rig is about 2 months old, so it is still fairly new.

Share this post


Link to post
Share on other sites
pinch the riser together and it should create a small pocket...Also make sure not to stow the tuck tab of the toggle in the front until you stowed the excess in the back. (Once the tab is stowed in the front it makes it even tighter to stow the excess)

hope it makes sense

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0