0
Aleks2116

Wingloading, What is too much?

Recommended Posts

Hi guys, just got my A class last weekend (woohoo) and starting my B-rels, so I have been looking into gear for a while now (got everything else just missing the rig). The problem is I don't know what size canopy to get. I have been looking around for a while now and I have stumbled across a second hand rig which I like that's just missing the main. The problem is it can only fit up to a 150. So I have tracked down a sabre 2 150 that will fit but I'm not sure whether the size will be too small for me to handle. My total jump weight is approximately 80kg (176lb) which will put my my wing loading at 1.17. So far I have only jumped on a silhouette 220 as a hire rig so obviously it will be a big change but I was just wondering what your opinions on this are, whether I get this rig or go for something bigger? Cheers :)

Share this post


Link to post
Share on other sites
Have you looked at the PD sizing chart for Sabre2?

http://www.performancedesigns.com/sabre2.asp

It suggests that with your exit weight, you'd have to be an expert jumper to use it. Do you consider yourself to be an expert jumper already?

I'm lighter than you by 10kg, have more experience, and I'm using a Pilot 188. Had a downwind landing today (first down sets the pattern and screwed us over) that I wouldn't have wanted to do on a smaller canopy. I'd suggest that if it was you who was doing it on a 150, you'd be in the hospital now. I also arrived at my 188 size after slowly stepping down through sizes one-by-one, 280-260-240-220-210-190-188.

I'm passing on the same advice that was given to me. Move through the sizes one at a time, look at the manufacturer recommendations, talk to your instructors about when to move down, etc.

"So many fatalities and injuries are caused by decisions jumpers make before even getting into the aircraft. Skydiving can be safe AND fun at the same time...Honest." - Bill Booth

Share this post


Link to post
Share on other sites
Not that I am a guru compared to most on here, but I am new like you so I'm posting up. If you have a desire to remain in this sport and not be permanently disabled (After a large amount of PAIN) or dead I'd suggest you not even think about going smaller than a 180. You are talking about dropping around 80 SF of fabric in one jump. I understand the desire to get to the point of the wing loaded cross braced awesomeness that we see everytime we are at the DZ but I promise you there is NO quicker way to get to that skill level. I would assume you could ask anyone with experience at your DZ and they would tell you the same thing.
Trail mix? Oh, you mean M&M's with obstacles.

Share this post


Link to post
Share on other sites
Talk to your instructors, they will be your best resource.

Review the downsizing checklist posted earlier in this thread. You shouldnt downsize more than 20 sqft at a time on larger canopies, and even less on smaller canopies.

I would probably look for a container that is sized for a 190. You can fit a 210 in there. Preferably, your reserve should be as big or bigger than your main.

Edit: changed my size recommendations.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0