0
Oyinko

Know how to fix a skydiving altimeter?

Recommended Posts

I broke my altimeter Viplo FT50 yesterday.

I opened it and found a small piece of the mechanical altimeter moving in the case.

http://i.imgur.com/8pCgERb.jpg

I would assume this piece is going in the middle of the Aneroid.

https://fr.m.wikipedia.org/wiki/Fichier:Faa_altimeter.JPG

Any advice on how should I fix it properly? Do you think it would be accurate after the fix?

Share this post


Link to post
Share on other sites
Oyinko

My brand new altimeter Viplo FT50 felt on the ground yesterday. Unfortunately something broke inside...

I opened it and found a small piece of the mechanical altimeter moving in the case.

http://i.imgur.com/8pCgERb.jpg

I would assume this piece is going in the middle of the Aneroid.

https://fr.m.wikipedia.org/wiki/Fichier:Faa_altimeter.JPG

Any advice on how should I fix it properly? Do you think it would be accurate after the fix?



You will need to send it to a repair facility, or at least a metrology repair facility that has an altitude chamber with reference gauges...

Unfortunately this is not the sort of thing one repairs at home... I have recalibrated a couple FT-50s in the past for good friends, they are straight forward movements for someone with experience with this type of instrument...

Share this post


Link to post
Share on other sites
Can you be a little more specific about the type of repair facility that you think could handle something like this? Same for a metrology repair facility. These aren't something you come across every day. Can you suggest one?

I, too, have an FT-50 that is out of whack. And since the manufacturer does not respond to inquiries, it's impossible to get it fixed that way.

Much appreciated if you could point us in the right direction.

Jonathan

Share this post


Link to post
Share on other sites
jonathan.newman

Thanks for the link, Sparky. I sent them emails in both English and French. Both were ignored. I've yet to hear from anyone who has successfully warrantied a Viplo alti. Would love to hear a positive experience.


That is unfortunate.. Many PIAs ago I contacted Viplo in regards to being a USA service center, but I never heard back from them..

As for a shop that would at least have the required equipment, you would need to find an aircraft altimeter repair shop, or maybe a barometer repair shop, but I seriously doubt any one would touch a skydiving altimeter.

Just a note: Even my warranty does not cover an altimeter that was dropped or hit against something. Altimeters are precision instruments, and have to be cared for as such. As a reference, never hit a mechanical altimeter harder than you would a fresh egg…

Hopefully you did not pay much for it. When buying gear, it is always a good idea to check the customer service history before you buy..

Share this post


Link to post
Share on other sites
Oyinko

I agree, but I opened mine and could see a weakness on the mechanical of the instrument: they use glue to stick a small cylinder on the aneroid...



I have seen that kind of thing before. Generally the idea is to have a bar, or sometimes a pad, as a contact surface instead of the aneroid. In this particular instance I can not say... I don’t use such a thing in my altimeters.

Quality, most of the time, is in what you can't see...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0