velo 103 in icon i3?

[Fab 0]

Hello,

Is a velo 103 and an optimum 143 with aad a good combination for an icon i3?. I also would like to be able to put a velo 96 in it...

Thanks

_______________________________________

[liftedtitan 0]

oh boy...here we go.

Moriuntur omnes, sed non omnes vixerunt.

[Fab 0]

no..."oh...boy..here we go..just need a yes or no..vector has all the data on their website, aerodyne has not.

_______________________________________

[DocPop 1]

According to PD the VE103 packs up slightly smaller than a SA135 or KA135 and the VE96 packs up like a 9-cell 120.

I would interpret that along with the Aerodyne site to say that the 96 will fit but you might have trouble with a 103.

Hopefully someone who has done it will chime in.

"The ground does not care who you are. It will always be tougher than the human behind the controls."

~ CanuckInUSA

[dragon2 0]

I'm stuffing a vengeance 135 in mine again atm, you're welcome to try a velo 103... I have a smart 120 though.

ciel bleu,
Saskia

[verticalflier 0]

You will not have any problems with either Velocity 103 or 96 in I3

[verticalflier 0]

Quote

no..."oh...boy..here we go..just need a yes or no..vector has all the data on their website, aerodyne has not.

UPT builds only harness containers so it is in their interest to post info about all canopies that are out there. Aerodyne builds complete system that means Icon harness, Smart reserve and whole bunch of mains. Since we trying to sell only Aerodyne, we it is in our best interest to post data about our products only.

[Fab 0]

Ok..great...thanks all

_______________________________________