adietkin 0 #1 July 27, 2010 http://www.youtube.com/watch?v=Hg6cz07Iulw&feature=player_embedded Quote Share this post Link to post Share on other sites
DSE 3 #2 July 27, 2010 This is a repost from a while back. Can't find the original thread ATM Quote Share this post Link to post Share on other sites
Hellis 0 #3 July 27, 2010 http://www.dropzone.com/cgi-bin/forum/gforum.cgi?post=2101957;search_string=micron%20lock%20up;#2101957 ? Quote Share this post Link to post Share on other sites
base283 0 #4 July 27, 2010 "wdf?!?!?!?" What does that mean? What is your thread about? Take care, space Quote Share this post Link to post Share on other sites
RIGGER 0 #5 July 27, 2010 This is an old story. The reserve closing loop is TOO long or the reserve p/c fabric was set too wide & went under the side flaps or both which might create what you see in the video. UPT print out an advice that the Cypres closing loop onall Vector 3 & Sigma h/c will max. 13 cm long (5") from cypres disc or shorter based on the reserve container size & canopy packed in. BUT MAX. 13 cm (5") The same was found in Mirage , Atom , Infinity & for that reason some mfg. chage the cutter location to TOP of Reserve P/C All is about Riggers will do the work as it should be done. Be Safe!!! Quote Share this post Link to post Share on other sites
