Crazywhit3 0 #1 December 2, 2009 I have an older style Z1 (where the outside bolt looks like the top of a screw). I cannot figure out how to undo the screw so that I can replace my cracked visor. I have tried turning the outside with a coin while using a wrench inside, and not matter what I do it still doesn't unloosen. Please help, I don't want to buy a new one when all I have to do is replace the visor! Quote Share this post Link to post Share on other sites
pilotdave 0 #2 December 2, 2009 Hold the nuts on the inside with your fingers, pushing in on them. Turn the screws on the outside with a coin... quarter turn. The nuts will pop off... spring loaded. Dave Quote Share this post Link to post Share on other sites
eightate8at8 0 #3 December 2, 2009 It's somewhat tricky, I just did this the other week. After you get it off you'll see that the inner piece has to be turned just right to slide out. Quote Share this post Link to post Share on other sites