JonnyMac 0 #1 July 9, 2008 Hi, I just found out that I bought a rig that has a Cypres 2 that is part of the recent recall. Any recommendations on how to get the unit repaired and keep jumping? I can't imagine sitting out for 6 weeks or more in the middle of summer. Is it at all conscionable to wait until the end of summer to send it in? Can I buy an old Cypres and have it swapped out while this unit is repaired? Thanks for your thoughts on this... Quote Share this post Link to post Share on other sites
likestojump 3 #2 July 9, 2008 SSK will rent you a Cypres - check their website. Your DZ may have a similar program in place as well. Also (assuming you are in the US) not all DZs require the use of Cypres - it may be possible to just have it removed and jump without it until it comes back. Depends on your DZ policy and personal comfort. good luck ! Quote Share this post Link to post Share on other sites
pilotdave 0 #3 July 9, 2008 You can't jump with a defective cypres in your rig. You can remove it and jump without it if you want. But you can also try to get a loaner unit while yours is being repaired. I don't know how hard it is to get one, but I know my DZ got a few while ours were out. Most of the cypres2s must have been fixed by now, so I wouldn't be surprised if they had most of their loaners back now. Dave Quote Share this post Link to post Share on other sites
rhys 0 #4 July 9, 2008 The recall is not a joke! a good friend of mine had his cypres pop at 1000' and ended up landing with two out. he was on a tandem but imaging he was swooping?? send your unit back and have it serviced! don't make another jump with t in, it could cost you your life!"When the power of love overcomes the love of power, then the world will see peace." - 'Jimi' Hendrix Quote Share this post Link to post Share on other sites
