0
mdrejhon

Need new visor for FREEZR helmet (original). Will FREEZR MK-II visor fit?

Recommended Posts

I have tried without a response -- It might be some kind of mail filter issue, I don't know - or that my English is hard to read by the germans... I had similiar difficulty earlier, when I lost one of the anchoring side caps...

Will try again with a different email address, and see if my email reaches them.

Share this post


Link to post
Share on other sites
That email is no good either. I give up on Paratec for now...

I'll just make do with the visor during this bigway camp, and get a more common North American skydiving helmet... Besides, replacement visors on will cost under $25 instead of $75 (according to paragear.com) ...

The FREEZR, while a really cool helmet, has not been without its flaws. The side caps keep popping off, and my right-hand cap (glossy red) is gone forever. They did away with those removable side caps for the FREEZR MK II which I am sure is much better, probably for this reason. So it may be time for me to call this helmet a write-off soon -- due to the high costs of replacement parts for this helmet and difficult-to-reach tech support *sigh*... And nobody on dropzone.com seems to know whether the visors are compatible! So hard to get information on! If I can somehow get the helmet fixed, I'll keep the FREEZR as a spare helmet. In the meantime, I jump with a somewhat worn-looking FREEZR, at least until I get a more common model such as Z1 or Oxygen. As a deaf guy, I generally don't make phone calls, but I may get somebody to call for me or use a relay service to make the call.
Quote

This is an automatically generated Delivery Status Notification

Delivery to the following recipient failed permanently:

[email protected]

Technical details of permanent failure:

TEMP_FAILURE: Gmail tried to deliver your message, but it was rejected by the recipient domain. The error that the other server returned was: 452 452 4.2.2 Disk quota exceeded. We recommend contacting the other email provider for further information about the cause of this error. Thanks for your continued support. (state 14)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0