0
norcalbaker

Can you fit a sabre2 170 in a Mirage G3 M3?

Recommended Posts

What size is the reserve?

I think you're going to end up with a very uncomfortable rig that may have less than perfect riser and pin protection because you're shoe horning canopies into it that it was never designed to take.

The M3 is designed for PD canopies in about the 150 size max.

t
It's the year of the Pig.

Share this post


Link to post
Share on other sites
huh ?

from Mirage site :
Main Canopies


Manufacturer Model Size Canopy Fit
Performance Designs Sabre I/II 135 Medium
Performance Designs Sabre I/II 150 Snug
Performance Designs Spectre 135 Medium
Performance Designs Spectre 150 Snug
Performance Designs Spectre 170 It's a brick!
Performance Designs Stilletto 135 Medium
Performance Designs Stilletto 150 Snug
Performance Designs Stilletto 170 It's a brick!
Performance Designs Vengence 120 Medium
Performance Designs Vengence 135 Snug
Performance Designs Vengence 150 It's a brick!

so it fits 170's like the Stiletto and Spectre... I know I have put a crossfire2-169 in an M3 as well.

Share this post


Link to post
Share on other sites
Quote

huh ?


so it fits 170's like the Stiletto and Spectre... I know I have put a crossfire2-169 in an M3 as well.



Yes.

The Spectre is a 7 cell. Fewer ribs = Less fabric. And it's a brick.
The Stilleto is an eliptical. Tapered trailing edge = Less fabric. And it's a brick.
The Crossfire is an eliptical. Tapered leading and trailing edges = less fabric. And it's a brick.

Since you posted the info from the mirage site - do you see a Sabre1/11 170 in there?

I don't.

In addition, main canopy size is only half the equasion which is why I asked for the reserve size. If a "like a brick" main is combined with a tight reserve packjob, with a cypres, at a 5000ft AMSL DZ, the rig may well be impossible to pack. (Parachutes pack bigger at altitude.)

In short, it's not on the list you posted for a reason.
Can you fit a Sabre 2 170 in a Mirage G3 M3? Yes.
Is it a sensible, practical, safe, comfortable thing to do? No.

t
It's the year of the Pig.

Share this post


Link to post
Share on other sites
I asked something similar to mirage, here is there response


A 170 9 cell would be really tight in the M3. We generally do not recommend doing a 170/160 combo in anything lower than an M4. If it were a 170 7 cell or a hybrid, like a Pulse or something, I would say go for it. Ask your local rigger if they have any experience with this combination. Any older Sabre 170 might be ok in this but like I said we don’t recommend it. Hopefully this helps. Take care!


hope that helps

Share this post


Link to post
Share on other sites
If you are buying the pilot new and really, really want to make it work-the ZPX version may be an answer.

I have a Pilot 140 ZPX in a Mirage G3 MT (Super SMALL container) with a PDR 126/Vigil and it packs nicely. A Spectre 120 was tight in the same container, a Velo 103 was a good fit. The Pilot I have is brand new ZPX with HMA lines. It might be a different story with fat-er lines.

Lastly-Tonto is right-size of reserve is an issue.

-Harry
"Sometimes you eat the bar,
and well-sometimes the bar eats you..."

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0