Jumpah 0 #1 November 16, 2006 Hey all, The camera box for my Rawa helmet should come on Friday. I'll be doing the install and I haven't installed a camera box before. I don't know what kind of directions will come with it. Does anyone have recommendations/caveats/helpful hints? Thanks! Quote Share this post Link to post Share on other sites
icevideot 0 #2 November 16, 2006 I would go down a little farther in the forums and post this under Skydiving Disciplines: Photography and Video . I know I see some of the same people here but you may get that special tip you are looking for there. I have never dealt with a Rawa but I do like to mock things up as much as I can before I start drilling or cutting. You also want to do all work on carbon fiber away from your cameras. The dust and tiny fibers are said to be conductive and can get inside and trash electronics. I do all that in the driveway so I know it won't hang around the house and clean it well before I stick my camera back in. Take your time and you will be fine. edited because of missing words"... this ain't a Nerf world." Quote Share this post Link to post Share on other sites
Jumpah 0 #3 November 16, 2006 Thanks...I've reposted over there. thanks for the word about carbon fiber dust...I did not know that. Cheers Quote Share this post Link to post Share on other sites