Cut away routing

[flyuke 0]

Are all hard husings from pad to 3 rings routed the same way?Are there any safety conurtations to it?Any rigs to avoid?Any problems with stiff pulls even with armoured risers?

[billbooth 10]

1. No soft housings
2. Housings should stretch, but not compress.
3. Clean breakaway cables often with silicone lubricant.
4. Make sure white closing loop is long enough.
5. Make sure riser housings (if installed) have capped upper ends.
6. Make sure riser rings are properly aligned.

Pictures are available at [www.relativeworkshop.com].

[piisfish 137]

www.relativeworkshop.com

scissors beat paper, paper beat rock, rock beat wingsuit - KarlM