bob.dino 0 #651 June 21, 2006 Two main containers, or the first canopy must be d-bagged out of the plane? If the former, more photos please? Including deployment system... Quote Share this post Link to post Share on other sites
FrogNog 1 #652 June 22, 2006 QuoteHi FrogNog, So, would that be two canopies attached to the same harness ring? Interested people want you to show us more. Jerry That is the theory. (Mini risers connected to the big rings.) I'll post more pictures when I do some more rigging and get closer to jumping it. As Amazon apparently questions, safely containing the tertiary risers is going to be interesting. (The tertiary canopy will deploy first, out of a belly-bag.) I think I may need to sew riser covers onto the front of a shirt. -=-=-=-=- Pull. Quote Share this post Link to post Share on other sites
Amazon 7 #653 June 22, 2006 You are going to put TWO sets of risers even with small rings onto the Big Rings??????? I would think a set of Large rings sewn onto wide risers that are connected to the Rigs rings might be safer. Then you could connect the Mini Risers from the Tertiary canopy onto that....just a thought. BUt two sets of rings even small ones on the big rings on the rig..... scares me.. and I am usually up for almost any foolish thing that can be jumped Quote Share this post Link to post Share on other sites
hookitt 0 #654 June 22, 2006 QuoteYou are going to put TWO sets of risers even with small rings onto the Big Rings??????? That's been done a LOT more than you may think.My grammar sometimes resembles that of magnetic refrigerator poetry... Ghetto Quote Share this post Link to post Share on other sites
bob.dino 0 #655 June 22, 2006 QuoteBut two sets of rings even small ones on the big rings on the rig..... scares me.. and I am usually up for almost any foolish thing that can be jumped As I understand it, that's quite normal. Quote Share this post Link to post Share on other sites
Amazon 7 #656 June 22, 2006 I would tend to think the potential for jambing between the two sets would be very high.... especially if loaded heavily at the time when you are wanting to chop it. Quote Share this post Link to post Share on other sites
KellyF 16 #657 June 22, 2006 When one set of risers is loaded, the other set gets moved over to the side and out of the wayVSE on Facebook Quote Share this post Link to post Share on other sites
FrogNog 1 #658 June 23, 2006 I have (had?) my own "ground doubts" about two sets of mini risers on one set of big rings, but I reviewed the alternatives and practicality played a significant factor. I do, of course, hope this works. -=-=-=-=- Pull. Quote Share this post Link to post Share on other sites
candace 0 #659 July 4, 2006 YAHOO!!!!!!!!!!!!!!!!! FINALLY! here's my beautiful new infinity...............can't wait to take it for a ride.. Quote Share this post Link to post Share on other sites
xlh883 0 #660 July 6, 2006 Nice rig! How long was your wait? I have been waiting three weeks now for a three week rush order. Should be getting my $200 back on the rush. David Quote Share this post Link to post Share on other sites
KellyF 16 #661 July 6, 2006 Hi David, we recieved your order June 19th, the day after our embroiderer left for a two week trip to China with her family. Naturally, that's going to make a 3 week deadline tough since embroidery is the first step in producing a rig. If we don't make the deadline by a few days, we'll work with you on the fee, but don't call "foul" until the party's overVSE on Facebook Quote Share this post Link to post Share on other sites
xlh883 0 #662 July 6, 2006 Wow, you surprised me here. I thought 3 weeks might have been asking a little too much anyway, but I am on somewhat of a time crunch. Unfortunately, I am moving out of California August 4th permanently, that is why I wanted the rush. As long as I can get it before then, should be ok. But of course, I would love to have it sooner than later, just like any one else so I can use it a jump or 2 or 3. Thanks for the info. Square 1 told me they would most likely call about it next week any way. David Quote Share this post Link to post Share on other sites
monkycndo 0 #663 July 10, 2006 Now having put two weekends of jumping on my new rig, I guess it's time to post pictures. My old gear that I bought used was pretty comfortable. Little did I know how comfortable it could be. It fits like a glove and the cut in laterals hold it to my back like it is part of me. I just love that new rig smell. VSE makes one beautiful rig. Thanks Kelly.50 donations so far. Give it a try. You know you want to spank it Jump an Infinity Quote Share this post Link to post Share on other sites
Shark 0 #664 July 19, 2006 Nice! Very cool "shark-ish" colors, too! Shark-rig 4.0 currently in production.... Quote Share this post Link to post Share on other sites
Elisha 1 #665 July 19, 2006 Your cutaway pillow rocks. Quote Share this post Link to post Share on other sites
monkycndo 0 #666 July 19, 2006 QuoteNice! Very cool "shark-ish" colors, too! Shark-rig 4.0 currently in production.... I saw your rig the last time I was down in 'Snore. I'll let you believe I used it as a starting point for mine if it makes you feel good. Once rig 4.0 gets delivered, make sure to post it to so I can see if it measures up to mine.50 donations so far. Give it a try. You know you want to spank it Jump an Infinity Quote Share this post Link to post Share on other sites
Brains 2 #667 July 19, 2006 I just have to chime in here and say that i got the chance to try on Kelly's rig at skyfest and although i have owned four javelins, i will be ordering an infinity in the VERY near future. Those cut in laterals are the shit. That is by far the most comfortable rig i have ever put on in my life. I told Kelly if his would hold a 126 reserve i would have tried to buy it right there. Never look down on someone, unless they are going down on you. Quote Share this post Link to post Share on other sites
Shark 0 #668 July 20, 2006 QuoteQuoteNice! Very cool "shark-ish" colors, too! Shark-rig 4.0 currently in production.... I saw your rig the last time I was down in 'Snore. I'll let you believe I used it as a starting point for mine if it makes you feel good. Once rig 4.0 gets delivered, make sure to post it to so I can see if it measures up to mine. Quote Share this post Link to post Share on other sites
xlh883 0 #669 July 22, 2006 Here is my new Infinity I just got a week ago. It fits great! I love it. I have 8 jumps on it already. Thanks Velocity Sports! David Quote Share this post Link to post Share on other sites
hookitt 0 #670 July 22, 2006 The rig looks great. What I like most is the front shot of the rig. The way the ricord handle is not seated properly in *Pictures Of Infinity Rig 001.jpg* is quite artsy. Nice work!My grammar sometimes resembles that of magnetic refrigerator poetry... Ghetto Quote Share this post Link to post Share on other sites
jdlm2004 0 #671 July 22, 2006 David, Your rig looks good! Quote Share this post Link to post Share on other sites xlh883 0 #672 July 22, 2006 lol Yea, I noticed it as soon as I picked it up off the chair and I fixsed that. I was like, oh shit! No big deal however. It only happened when I moved the rig around a bit. FOrogt to "protect the reserve" handle. David Quote Share this post Link to post Share on other sites xlh883 0 #673 July 22, 2006 Thanks Jeff. I figured you would want to see it if you had the chance to. Now get back up in the air darn it! I hope you can finish up your AFF soon. David Quote Share this post Link to post Share on other sites brianfry713 0 #674 July 27, 2006 Don't forget to take out the pull-up cord and tuck in the flaps before you jump it. Quote Share this post Link to post Share on other sites freelyflyn71 0 #675 July 27, 2006 I bought mine slightly used, but I really like it so far. I would definately consider buying a new one when the time comes to downsize a bit! The Braver the Bird...The Fatter the Cat. Quote Share this post Link to post Share on other sites Prev 22 23 24 25 26 27 28 29 30 31 32 Next Page 27 of 40 Join the conversation You can post now and register later. If you have an account, sign in now to post with your account. Note: Your post will require moderator approval before it will be visible. Reply to this topic... × Pasted as rich text. Paste as plain text instead Only 75 emoji are allowed. × Your link has been automatically embedded. Display as a link instead × Your previous content has been restored. Clear editor × You cannot paste images directly. Upload or insert images from URL. Insert image from URL × Desktop Tablet Phone Submit Reply 0
xlh883 0 #672 July 22, 2006 lol Yea, I noticed it as soon as I picked it up off the chair and I fixsed that. I was like, oh shit! No big deal however. It only happened when I moved the rig around a bit. FOrogt to "protect the reserve" handle. David Quote Share this post Link to post Share on other sites
xlh883 0 #673 July 22, 2006 Thanks Jeff. I figured you would want to see it if you had the chance to. Now get back up in the air darn it! I hope you can finish up your AFF soon. David Quote Share this post Link to post Share on other sites
brianfry713 0 #674 July 27, 2006 Don't forget to take out the pull-up cord and tuck in the flaps before you jump it. Quote Share this post Link to post Share on other sites
freelyflyn71 0 #675 July 27, 2006 I bought mine slightly used, but I really like it so far. I would definately consider buying a new one when the time comes to downsize a bit! The Braver the Bird...The Fatter the Cat. Quote Share this post Link to post Share on other sites
