AJ7298 0 #1 November 7, 2014 Are there any videos out there of a rig being hooked up the a Squirrel ws (Swift) in skydive mode? The user manual the suit came with has some decent close-up pics of the zippers, but not really a "how-to" to make sure everything is sitting in there evenly and how it should be. Or does anybody have a pretty detailed play-by-play? Hooking up the rig to a Phantom is very straight forward....This seems a little less intuitive. Quote Share this post Link to post Share on other sites
Bealio 0 #2 November 8, 2014 Send an e-mail to squirrel. You'll probably get an answer faster from them anyways. Quote Share this post Link to post Share on other sites
flipwithit 0 #3 November 8, 2014 place rig on floor pins down unzip the back zips of wing suit place over rig put leg straps through the back zips and zip up bring top and bottom zips together with the provided bungees open front zips bring the suit under the main lift web and zip back together. make sure handles are outside zips. tie upper and lower zips together to make sure proper fitting: put on rig and wingsuit, tighten everything down, zip everything up, except the arm wings. once everything is tight pull the suit down from the bottom of the zippers front and back and everything should move into place. Quote Share this post Link to post Share on other sites