Jump to content

RSL Removal on the Javelin/Javelin Odyssey

By adminon - Read 3699 times

This letter dated February 27, 2007 from Sun Path Products, Inc. addresses the issue of Reserve Static Line Removal on the Javelin/Javelin Odyssey. Download the Letter from SunPath.


Reserve Static Line (RSL) and the Javelin/Javelin Odyssey

Reference: This letter supersedes SPP letter regarding removal of the reserve
static line (RSL) dated 16 May 2005.

1. Is the RSL a part of the TSO’ed components of the system?

YES

2. Can any or all of the RSL components (RSL lanyard, hook Velcro on
reserve riser, guide rings on pin flap and main riser RSL ring) be
removed from a Javelin/Javelin Odyssey without voiding the TSO?

YES, however the FAA determines this to be an "alteration". This means
that only a master parachute rigger can perform this action. (Ref. AC105-2c)
Once the master rigger removes the requested RSL components, the
alteration must be noted on both the packing data card and the master
parachute riggers log book.

3. Does removal of the RSL void the TSO?

YES, this only applies if someone OTHER than an FAA master parachute
rigger or foreign equivalent removes any RSL components, or the removal of
the components is not logged on the packing data card.

4. Who can pack a reserve in a Javelin/Javelin Odyssey without a RSL?

As long as a master parachute rigger has indicated the removal of the
components, (i.e. lanyard, rings, Velcro) on the packing data card, any senior
or master rigger or foreign equivalent can repack the reserve.

5. Who can pack a main in a Javelin/Javelin Odyssey without a RSL?

As long as a master parachute rigger has indicated the removal of the
components, (i.e. lanyard, rings, Velcro) on the packing data card, any senior
or master rigger or foreign equivalent, anyone under the direct supervision of
the afore mentioned or the person making the next jump can repack the
main.

5. If I am a senior rigger and I get a Javelin/Javelin Odyssey to repack
that has any or all RSL components removed, what do I do?

The senior rigger will need to check the packing data card to see if the
appropriate entries have been made. If yes, then the rig is "legal" to be
packed by a senior rigger. If not, the rig will need to be taken to a master
rigger who can approve the alteration and note the removal of the
components. The master riggers data card/log book notation is only
certifying the alteration.

6. Who is authorized to remove the RSL and when?

Only a Master parachute rigger or foreign equivalent can permanently remove
the RSL components thus altering the TSO’ed system.
The user can "disengage" the RSL lanyard by disconnecting the snap
shackle, if in an emergency situation or to avoid a possible emergency
situation ONLY
. The owner/jumper (unless a master
rigger) is not authorized to permanently remove the RSL lanyard.

Sun Path Products, Inc. position on the removal of the RSL components remains
unchanged. "Permanent removal of this part is highly discouraged and NOT
recommended". However we do acknowledge situations that the user may wish
to have the RSL components removed from the system or not have the system
installed with the components at all. Therefore this guidance should serve as
reference for fielded systems as well as new assemblies.

Systems manufactured after Feb 2007, come with the RSL/Collins lanyard as
standard items. This incorporates the Marine eye reserve ripcord, Curved
Reserve Pin with lanyard and the RSL/Collins lanyard.

The Skyhook can be added by the manufacturer as an option by adding the Red
Skyhook lanyard to the RSL/Collins lanyard and corresponding skyhook on the
reserve bridle.

An alteration to the RSL/Collins lanyard on the post Feb. 2007 rigs will require a
terminal pin reserve ripcord which must be replaced with factory TSO’ed
components only. *** (reference Pg 6. of the Javelin/Javelin Odyssey Owners
Manual Rev. 2 Issue 01 March 2007)

PDF FileDownload the Letter from SunPath

Dave Singer

Engineer

Sun Path Products, Inc.

Derek Thomas

President

Sun Path Products, Inc.

Sun Path Products, Inc. * 4439 Skydive Lane * Zephyrhills, FL33542

Phone 813-782-9242 * FAX 813-788-3057 * www.sunpath.com

0
0

SIGN UP OR LOGIN

Create a free account or login to comment on this article.

Sign Up Login

Buy from these trusted stores

User Feedback


There are no comments to display.



Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×