Search for
 

Log In:

Username:
Password: Remember me:

Go Register
Go Lost Password?




Forums: Skydiving Disciplines: Swooping and Canopy Control:
Removing the Slider for Ground Lanching

 

 


aresye

United States
Jumps
License
In sport
: 108
: B 31421
: 1 years


Sep 23, 2008, 7:55 PM

Post #1 of 6 (603 views)

Registered: Mar 23, 2008
Posts: 334

Removing the Slider for Ground Lanching Can't Post

Got a quick question for you all.

I've recently been getting into GL. I have a great mentor helping me out with the basics, and in a few weeks I should be taking the GL course with Jim. I jump a 190 Spectre, with a collapsable slider. I intend to use the canopy mainly to practice kiting, and forward launches.

How can I remove the slider?

I know how to remove the slider from the front and back risers, but the problem lies with the steering lines. I have large 3-rings, with the large style risers. I there any way to remove the slider from the steering lines, or am I doomed to consult a master rigger?


floormonkey

United States
Jumps
License
In sport
:  
: D 
:  


Sep 23, 2008, 8:11 PM

Post #2 of 6 (598 views)

Registered: Sep 11, 2002
Posts: 184

Re: [aresye] Removing the Slider for Ground Lanching [In reply to] Can't Post

take the toggle off the brake line, pull the line out of the guide ring. take off the slider. put the line through the guide ring. put the toggle back on (through the back, over the bottom.)


aresye

United States
Jumps
License
In sport
: 108
: B 31421
: 1 years


Sep 24, 2008, 2:42 PM

Post #3 of 6 (495 views)

Registered: Mar 23, 2008
Posts: 334

Re: [floormonkey] Removing the Slider for Ground Lanching [In reply to] Can't Post

Okay, I found the error in my ways, and was able to remove the slider. Did a continuity check with the canopy, and everything is good to go.

Thanks for the tip! Turned out I was slipping the line off the toggle the wrong way.


oosskis

Canada
Jumps
License
In sport
: 1
: D 1012
: 10 years


Oct 23, 2008, 10:29 AM

Post #4 of 6 (226 views)

Registered: Nov 4, 2001
Posts: 57

Re: [aresye] Removing the Slider for Ground Lanching [In reply to] Can't Post

Make sure you have somebody experienced check if you put it all back on correctly. Mals suck.


ozzy13

United States
Jumps
License
In sport
: 802
: D 
: 2 years


Oct 23, 2008, 5:43 PM

Post #5 of 6 (185 views)

Registered: Aug 29, 2006
Posts: 585

Re: [oosskis] Removing the Slider for Ground Lanching [In reply to] Can't Post


In Reply To
Make sure you have somebody experienced check if you put it all back on correctly. Mals suck.


No cutaways on ground launching!!! Tongue But still can have a MAL


aresye

United States
Jumps
License
In sport
: 108
: B 31421
: 1 years


Oct 23, 2008, 5:50 PM

Post #6 of 6 (181 views)

Registered: Mar 23, 2008
Posts: 334

Re: [ozzy13] Removing the Slider for Ground Lanching [In reply to] Can't Post

Had a rigger check my canopy before skydiving again. Everything was setup perfectly, yet I had one nasty slammer.

Yes...I remembered to put the slider back on Tongue

 
 
 


Search for (options)





Skydiving | BASE Jumping | Rock Climbing