Oct 20, 2017, 8:57 AM
Post #1 of 8
Sony X3000 Mount Curved helmet or flat
I have been a fan of the Sony X3000, but annoyed with the mounting options. I came up with a flat lock that isn't much bigger than the camera. There will be 2 options for the base, which is the piece that gets attached to the helmet. Flat or curved. I attached pictures of the mount on a Cookie G3, but also a picture of the flat mount. This will be attached via 3M VHB tape. The piece that attaches to the camera via the bolt, has a cutout so you can access your card. There is also a piece for the anti rotation hole in the bottom of the camera. I am getting ready to get these made, just trying to see interest and get some feedback from people. Let me know what you think.
Nov 9, 2017, 9:46 AM
Post #7 of 8
Re: [piisfish] Sony X3000 Mount Curved helmet or flat
[In reply to]
I have not added this feature, but it would be easy to cut out some of the adhesive tape on the bottom, and put a strap through prior to attaching the mount to your helmet. If I can find some I will include the strap and leave it to the user as an option.