Forums: Skydiving Disciplines: Photography and Video:
Schumacher Stealth Box Question

 


woppyvac  (D 33147)

Apr 10, 2013, 11:42 AM
Post #1 of 4 (884 views)
Shortcut
Schumacher Stealth Box Question Can't Post

Just got one in the mail for a CX110. I see how it's designed to be set up but have a question regarding how snug everything needs to be.

The Filter Bushing rests in the circular cut out of the box pretty well but it still has a little (very little) movement.. is it supposed to be a Tight fit with zero movement? Just seems that lil bit could cause vibration while shooting.

Same deal with the Filter Bushing and the Step Ring.. Supposed to be a tight fit or is it okay to have that minimal wiggle?


sky490

Apr 10, 2013, 4:22 PM
Post #2 of 4 (806 views)
Shortcut
Re: [woppyvac] Schumacher Stealth Box Question [In reply to] Can't Post

It is a friction fit. The bushing on the step ring will hold everything tight, you will not get any shake. If you want put some foam tape on the lid so that when it closes it will squeeze down. Not too much as this will distort the plastic camera.
Blue Skies
Terry Schumacher
In reply to:


woppyvac  (D 33147)

Apr 10, 2013, 9:42 PM
Post #3 of 4 (777 views)
Shortcut
Re: [sky490] Schumacher Stealth Box Question [In reply to] Can't Post

Thanks Terry! I have the set up pretty much ready to roll. I pretty sure that a foam insert under the camera will further cement the entire setup into place. It's a great lil design.

Kudos.


woppyvac  (D 33147)

Apr 29, 2013, 4:36 PM
Post #4 of 4 (622 views)
Shortcut
Re: [woppyvac] Schumacher Stealth Box Question [In reply to] Can't Post

Okay - Finally got to put the stealth box to work this weekend... it is worth it's weight in gold!

TY



Forums : Skydiving Disciplines : Photography and Video

 


Search for (options)