Forums: Skydiving Disciplines: Photography and Video:
Here is Gopros reply to exposure lock problem, for what its worth

 


spencer  (D 208)

Mar 15, 2013, 12:12 PM
Post #1 of 3 (1356 views)
Shortcut
Here is Gopros reply to exposure lock problem, for what its worth Can't Post

Sorry about the problems with exposure locking in the two shortest time lapse intervals. Would you believe that was intended as a feature and it's not a bug? My understanding is that some folks in the skydiving community asked for it, but since then we've heard lots of complaints from other skydivers, so we've asked the engineering folks to make it an option you can turn on or off.

For now be aware that in the two shortest time lapse modes, 0.5 and 1.0 seconds, the exposure will latch on to the values encountered at the first frame. For time lapse intervals of 2.0 seconds and longer each frame will be imaged using auto exposure.
Remember that if auto-exposure results in flickering you can improve and smooth out the assembled video by invoking the De-flicker filter from the Advanced Settings menu of our free Cineform Studio software.
Keep an eye on the forums and check in to the firmware update page every few weeks for when the update hits.
Thank you so much for your feedback.


steveorino  (D 26782)

Apr 30, 2013, 9:56 AM
Post #2 of 3 (757 views)
Shortcut
Re: [spencer] Here is Gopros reply to exposure lock problem, for what its worth [In reply to] Can't Post

That's why I sold my 3 and bought another 2. It is hard to compete with a 2 giving them 4x the amount of pics even if the 3 is better quality.


(This post was edited by steveorino on Apr 30, 2013, 9:57 AM)


spencer  (D 208)

Apr 30, 2013, 1:12 PM
Post #3 of 3 (711 views)
Shortcut
Re: [steveorino] Here is Gopros reply to exposure lock problem, for what its worth [In reply to] Can't Post

yes my 3 also went back to the shop, I am back using the 2 also



Forums : Skydiving Disciplines : Photography and Video

 


Search for (options)