Jun 28, 2012, 11:57 AM
Post #1 of 8
(553 views)
Shortcut
Must send back to factory for RSL install?
Can't Post
For what reason would a rigger opt to send back a container to the factory to install an RSL? Container is a Vector Micron v310. To my knowledge no RSL had been previously installed on the rig, but the Vector manual has rigging instructions for SkyHook and standard RSL assemblies so there's definitely something I don't understand.
Jun 28, 2012, 12:12 PM
Post #2 of 8
(539 views)
Shortcut
Re: [cbuffalino] Must send back to factory for RSL install?
[In reply to]
Can't Post
Quote:
For what reason would a rigger opt to send back a container to the factory to install an RSL? Container is a Vector Micron v310. To my knowledge no RSL had been previously installed on the rig,
Maybe the rigger is not a Master Rigger which would be required since it is a change to the original manufactured configuration...
Also, some riggers will send complicated repairs to the factory as they may not have the skill sets, machinery, or both needed to do the work.
Jun 28, 2012, 12:18 PM
Post #4 of 8
(532 views)
Shortcut
Re: [masterrigger1] Must send back to factory for RSL install?
[In reply to]
Can't Post
In reply to:
Quote:
Actually, the rigger sounds heads up to me!
I'm clearly not educated enough so I figured I'd ask. Definitely wouldn't question his choices just was wondering if that was normal or not being i'm not experienced in the area. Thank's again for your help.
. He just mentioned that there's an instruction for the Skyhook and the RSL in the manual. My mistake. 
