Forums: Skydiving: Gear and Rigging:
BoneHead AltiMount + Neptune 2

 


3mpire  (C 39657)

Mar 15, 2012, 9:52 AM
Post #1 of 2 (464 views)
Shortcut
BoneHead AltiMount + Neptune 2 Can't Post

http://www.youtube.com/watch?v=1O9cw4gv-Mg

Has anyone mounted an Alti2 Neptune 2 on a BoneHead AltiMount?

In the demo video above they recommend measuring and drilling to mount OR using Velcro.

I'm curious if anyone out there has done this specifically with a neptune 2?

Were the stock screws that you would use to mount to the wrist strap long enough to mount to the BoneHead?

I hadn't heard of using Velcro, would that really be a good idea? I have some patches of Velcro with adhesive on the back--I used it to put on the inside of my helmet to make the inserts stay on better. I'm a little hesitant to use that to attach an alti...?

Is there a different mount that people with Neptunes use with more success?

Thanks in advance all!


hokierower  (B 36150)

Mar 15, 2012, 3:33 PM
Post #2 of 2 (397 views)
Shortcut
Re: [3mpire] BoneHead AltiMount + Neptune 2 [In reply to] Can't Post

I have an N3 mounted to an AltiMount. I ended up securing the rubber mount by drilling four holes and using zip ties to secure it. I also drilled an additional two holes for the other sensors. No screws whatsoever.



Forums : Skydiving : Gear and Rigging

 


Search for (options)