Forums: Skydiving: Skydiving History & Trivia:
Russian D6 malfunction video


SEREJumper  (D 29555)

Nov 23, 2011, 10:20 PM
Post #1 of 5 (1246 views)
Russian D6 malfunction video Can't Post

Jumper using a D6 has an interesting ride under main and reserve. More than likely would have been fine landing with the main though.

Video description: "A step- through malfunction caused higher fall-rate compared to 20kg heavier jumper who exited before me. On the other hand, the Z-5 reserve parachute did not inflate properly, as there wasn't enough fall-rate :)

The D-6 was packed for educational purposes - to demonstrate the shape of packed D-6, I managed to put it on accidentally :)

darkwing  (D 4164)

Nov 24, 2011, 4:54 AM
Post #2 of 5 (1204 views)
Re: [SEREJumper] Russian D6 malfunction video [In reply to] Can't Post

For me this was a pleasant trip down memory lane. For younger jumpers it might be terrifying. I loved the casual toss of the reserve, and its leisurely inflation.

councilman24  (D 8631)

Nov 24, 2011, 7:01 AM
Post #3 of 5 (1176 views)
Re: [SEREJumper] Russian D6 malfunction video [In reply to] Can't Post

Interesting in lots of ways.

I was wondering how in the world someone could pack that and not no it until I realized it hadn't been packed to jump. Nothing like picking up the training aid to get on the airplane!

Four steering lines? One on each riser? And a canopy sewn together from handkerchief size pieces of fabric.Shocked

Anybody have better pictures of the riser attachments? Are those some sort of cutaway system or permanently attached?

I like the shadows showing the reserve finally inflated before landing.

pchapman  (D 1014)

Nov 24, 2011, 3:42 PM
Post #4 of 5 (1133 views)
Re: [councilman24] Russian D6 malfunction video [In reply to] Can't Post

Hey Terry,

There's a red steering cord that goes between the front and rear riser, one on the left, another on the right. So it is effectively 4 steering lines. Each pair has one line going up towards the skirt just beside the slot in the front of the canopy, and the one that's at the back. The steering lines don't go all the way up; they just attach part way up into the appropriate suspension lines, as has been done on some American rounds.

Edit: All that is for turning. For movement, one is stuck with good old sideslipping.

Thus one is getting turning power from both of the small slots. (I think the front lines cross over so that the direction of push is appropriate.)

As for the riser attachments, that system is designed for no aerial cutaway. One riser is designed for ground release in case of dragging.

The riser release:
There's a velcroed flap with a big stiff tab. Grab the tab to open the flap and keep pulling. That pulls out a big pin (restrained with a bungee) from across the riser. That lets fabric webbing (white in the photo) uncoil from around the metal bar for the riser and the metal bar for the harness. The wrap is I guess a bit like a Strong Wrap.

Thanks SEREJumper for the video. I haven't jumped my D-6 since last year. Smile

(This post was edited by pchapman on Nov 24, 2011, 3:43 PM)
Attachments: CIMG8394cra D-6 riser release.JPG (288 KB)

Tink1717  (D 12524)

Nov 24, 2011, 4:08 PM
Post #5 of 5 (1128 views)
Re: [SEREJumper] Russian D6 malfunction video [In reply to] Can't Post

Even in Russian, I understand "who the hell packed this?"!~ Cool

Forums : Skydiving : Skydiving History & Trivia


Search for (options)