Jul 31, 2011, 7:23 AM
Post #1 of 12
(2362 views)
Shortcut
Go straight for reserve or deploy main first when your cutaway handle's been pulled accidentally?
Can't Post
Hi there,
saw this video where a skydiver accidentally pulls another skydiver's cutaway handle on exit.
Wondering what I would do in that situation I thought I'd put in on here to see what others feel to be the best way to go:
1) use your normal deployment sequence and expect the main to fly away and then you (or your rsl) pull your reserve
or
2) go for your reserve straight away to not risk having anything go wrong with the main first opening and then flying off (not sure what the additional risks there would be in this situation)
It really bothers me that I'm not sure what I would have done if it were me in that video.
Sidenote: of course I will check with my local instructor first before my next jump with regards to stuff learned online.
(This post was edited by rhopstr on Jul 31, 2011, 7:24 AM)
Jul 31, 2011, 10:15 AM
Post #8 of 12
(2223 views)
Shortcut
Re: [rhopstr] Go straight for reserve or deploy main first when your cutaway handle's been pulled accidentally?
[In reply to]
Can't Post
In reply to:
In reply to:
Reserve first, the main's still securely locked in the container and the main risers aren't going anywhere soon.
You wouldn't be worried about the main risers catching wind etc and deploying unintentionally?
Think about it. While the risers are disconnected, the main container is still held closed by the closing pin. How would disconnecting your risers open the main container? So what could "deploy"?
Jul 31, 2011, 5:51 PM
Post #9 of 12
(2108 views)
Shortcut
Re: [dragon2] Go straight for reserve or deploy main first when your cutaway handle's been pulled accidentally?
[In reply to]
Can't Post
I would have thought the same as OP. I would have assumed after cutting away that the main would want to leave the container. I won't be shy to admit that i misunderstood the mechanics of the cutaway system. I'm glad i read this thread..
Jul 31, 2011, 8:39 PM
Post #10 of 12
(2064 views)
Shortcut
Re: [CloudyHead] Go straight for reserve or deploy main first when your cutaway handle's been pulled accidentally?
[In reply to]
Can't Post
In reply to:
I would have thought the same as OP. I would have assumed after cutting away that the main would want to leave the container. I won't be shy to admit that i misunderstood the mechanics of the cutaway system. I'm glad i read this thread..
CloudyHead, your post indicates a lack of gear knowledge. It also indicates that you realize that and will be rectifying it soon. Good stuff.
Jul 31, 2011, 10:54 PM
Post #11 of 12
(2019 views)
Shortcut
Re: [rhopstr] Go straight for reserve or deploy main first when your cutaway handle's been pulled accidentally?
[In reply to]
Can't Post
At first I thought this guy's buddy had brought along a cutaway handle just to mess with his mind. Then You see his three ring coming apart.....Hilarious.
Thread Options
