Apr 20, 2006, 2:50 PM
Post #53 of 122
(15477 views)
Shortcut
Re: [hurricane749] "Contact The Manufacturer"
[In reply to]
Can't Post
Dear hurricane,
I've repaired my share of french material. I've noticed that there is a line shrinkage possible of approximately 10 to 15 cm. (depending on initial line length, age etc.). So there is you difference. About installing them, I would say measure the (old) line lengths individually and project those lengths on the new lines. What I mean is, the shortest line on the old lines would most likely to be the shortest line in the new set.
) and Klaus Rheinwald (vidiot) of Paralog. 
Thread Options
