Forums: Skydiving: Safety and Training: Re: [kallend] low jump numbers, camera and low exits: Edit Log


davelepka  (D 21448)

Jan 19, 2013, 4:36 AM

Views: 2649
Re: [kallend] low jump numbers, camera and low exits

Quote:
You can't set up ANYBODY based on what the future MAY hold. You go with what is NOW.

38 jumps? He just MAY be that next world champion. But not at 38 jumps. I don't care who he is or what debatable "skills" he has. 38 jumps is not enough experience for the category of canopies you are talking about. Not on the internet, not in person.

--------------------------------------------------------------------------------


Well, nice way to MISS THE POINT, which is:

Should an inexperienced skydiver ask questions on the internet, or ask his/her instructor?

Over and over again it's preached "Ask your instructor". Now you appear to be reversing that.

I don't see how one has to be mutually exclusive to the other.

Are there questions you should ask your intsructor over and above the opinion of those on the internet? Yes.

Are there things that are so highly improbable that regardless of how well someone knows you or your skydiving ability nobody can give you an answer with any realistic degree of certainty? Yes.

Those are two seperate things. An instructor who has worked with you would be the best source of information with regards to skydiving decision making within the confines of common sense.

Regardless of who your instructor is, that cannot tell that it will be OK to turn off your AAD and open your main at 600ft on your next jump. You may have had a clean, trouble-free pull sequence for your last 38 jumps, and the rig you're jumping might have opened clean in far less than 600 ft for the last 38 jummps, but regardless of those facts, no instructor has the foresight to be able to reliably forecest your future performance (or that of your equipment) when your life may depend on their choice.


(This post was edited by davelepka on Jan 19, 2013, 4:37 AM)


Edit Log:
Post edited by davelepka () on Jan 19, 2013, 4:37 AM


Search for (options)